Sigma Controls MYRIAD QLC, Instruction Manual

Page: 9 / 18

9
In the example shown above, relay 2 and 4 are active, digital output 2 is active and digital input 4 is
active. Any active point will be indicated as shown.
From any of the status screens press ‘ENTER’ to access the ‘password screen’ and the programming
screens.
Enter user selected password (factory default is zero) with the
↑ ↓
up and down keys , then with
→ ←
arrow buttons, move cursor to ‘next’
Press ‘ ENTER’ to access menu 1
In this screen user access is provided for.
SCALE – Permits analog scaling of each analog input
AOUT - Permits analog scaling of each analog output
SETPOINTS - Permits sets values for relay and digital outputs for each channel
DIN - Allows the user to set the condition of a digital input
With the desired item highlighted, press ‘ENTER’ to access the menu.
Scale:
Press ‘ENTER’ to select scaling for channel 1 or use the
↑ ↓
buttons to select the desired channel, press
‘ENTER’ to access scaling for input 1.