Sigma Controls MYRIAD QLC, Instruction Manual

Page: 12 / 18

12
A) With the cursor selecting ‘INPUT = 4.00’ use the
↑ ↓
buttons to change the input value for the
required displayed value.
B) Use the
→ ←
buttons to move the cursor to the ‘display’ value and the
↑ ↓
buttons to change the
desired display for the previously selected input. Once complete, scroll to ‘SAVE’, press
‘ENTER’ to access ‘INPUT SCALE 2’ screen.
Follow the steps outlined above to set the values of ‘input’ and ‘display’ for input Scale 2.
When complete with scale 2, scroll the cursor to the ‘DONE’ position and press ‘ENTER’ to move to
programming screens for input #2 and repeat the above steps.
After setting all four input channel parameters, return to ‘MENU 1’ and select ‘AOUT’ to program analog
outputs for each channel.
Analog Outputs:
Using the buttons as described previously, select and adjust the values required for the analog output for
channel 1. Both the output value and the display value for that output can be selected. When complete,
select ‘NEXT’ and press ‘ENTER’.
This will bring up the scaling window for analog output 1 point 2 which is set as before. When complete
scroll to ‘DONE’ and press ‘NEXT’ to move to analog output settings for channels 2 – 4.
When complete, return to Menu 1 and select ‘SETPOINTS’ to access the setpoint menu.
Setpoints:
NOTE: Each channel is provide with one SPDT Form ‘C’ relay output and one 24 VDC digital output.