4
2.5 Connecting to Inverter
The package contains the Remote LCD and a 20m(65.6 ft) RJ45 cable. Use the RJ45 cable to connect the
Remote LCD ‘COM’ port and the inverter ‘RS485’ port.
2.6 LCD & Specification Setup
Power ON/OFF
Once the unit has been properly installed and the batteries are connected well, simply press On/Off switch
(located on the button of the case) to turn on the unit.
NOTE : When the Remote LCD is running, the inverter power switch should stay as “OFF”.
The operation and display panel area includes three LED indicators, four function keys and a LCD display.
It shows very rich operating info.
1 LCD display 2 Status indicator 3 Charging indicator 4 Fault indicator 5 Function buttons
LED Indicator
Operation Status
Green
Solid On Output is powered by utility in AC mode.
Flashing
Output is powered by battery or PV in battery
mode.
Green
Solid On Battery is fully charged.
Flashing
Battery is being charged.
Red
Solid On Fault occurs in the inverter.
Flashing
Warning condition occurs in the inverter.
Button
Description
ESC
To exit setting mode
UP
To go to previous selection
DOWN
To go to next selection
ENTER
To confirm the selection in setting
mode or to enter setting mode
