Copyright ©Sigicom AB 2016
1
Developed and manufactured by:
Sigicom AB
Alfred Nobels Allé 214
SE – 146 48 Tullinge, Sweden
Email address for support issues:
IMPORTANT SAFETY INSTRUCTIONS –
read this before use.
Workplace hazards:
This equipment will be installed close to rail and road
traffic, which is hazardous workplace. It is very important
to investigate for regulations in respect of risk assessment,
formal personal education demands, authorization etc.
before installation of the equipment.
Operating conditions:
This equipment is designed for outdoor use and wet
locations, but is not immersible. It is designed according to
IEC60529 IPX7.
Temperature range for full functionality is -20 to +50 ºC
(-4 to +122 ºF).
Others:
Do never attempt to disassemble the instruments.
Do never attach your X20SR to any other system or current
source than cables and units within the INFRA Field
Monitoring System.
The radar module used is third party certified to ETSI EN
300 440-2. Its output power is max 20dBm EIRP straight
ahead of the unit at 1% duty cycle. This leads to an average
output power of approximately 1mW strait ahead of the
unit,
which can be considered as safe for all living
creatures.
