14 Copyright ©Sigicom AB 2016
4.7
Quick start
1.
Connect your X20SR Speed Radar with your INFRA
Datalogger (Master, Mini or Micro) by using any of the
available INFRA Sensor Cables.
2.
Start the Datalogger and wait for initialization process to be
finished.
3.
Under the menu
Nodes
you’ll find your SR unit as
SR X20SR-
<serial no.>
,
where SR is the customer string and
<serial no.>
is the serial
number.
4.
Check and make necessary changes of its setup.
5.
Activate REG ON, and the measurement will be initiated.
