SightLine ICD-4000-OEM, Manual

Page: 6 / 21

ICD-4000-OEM
© SightLine Applications, Inc. 4
4.2.2 Gap Pads Without SOM Cover
The cover may be removed if a machined heatsink interface is implemented. STEP files for the OEM
with the SOM cover/heat spreader removed are available from SightLine that can help with heatsink
design and integration.
Contact Support for more information.
5 Connector Descriptions
Figure 3: 4000-OEM Connector Descriptions
Table 1: Connector Descriptions
Connector Description Mates with:
J2: Serial Port / GPIO Serial port 1, GPIO Molex 5POS Housing, 51021-0500
J4: Ethernet 10/100 Ethernet 10/100Mbps Molex 4POS Housing, 51021-0400
J6: 3000/4000 Video Adapter Input Digital video in 0, serial port 2, I
2
C-1, GPIO DF12(3.0)-80DS-0.5V(86)
J7: 4000-DEBUG / Recovery * System recovery and debug serial port Molex 8 POS Housing, 51021-0800
J8: USB 3.0 (Type-C) USB 3.0 (type C) USB Type-C Cable
J9: MIPI Port (FFC connector)
MIPI Port, I
2
C-3 (Digital Video in 1, serial ports,
w/adapter board)
Sightline Cable SLA-CAB-MIPI-02
J15: MicroSD MicroSD card slot NA
J16: HDMI Output Video (FFC
connector)
HDMI Output (FFC) Sightline Cable SLA-CAB-HD10
J25: Additional Serial / GPIO Serial port 0 and 3, GPIO Molex 8POS Housing, 51021-0800
J50: Power Connector
Typical 12VDC (see 4000-OEM Specifications for
min/max)
Molex 4POS Housing, 51021-0400
S2: IO2 SOM INFORCE SOM. Pinout not included in this ICD.
For customers making custom interface boards,
contact
Support .
NA
S3: IO1 SOM NA
* The debug serial port is exposed on J7 P7-8 and should be reserved for debugging only. Debug serial port is 1.8V TTL .

CAUTION: J4 (Ethernet) and J50 (power) are adjacent 4-pin connectors. DO NOT connect power to the Ethernet
port. Connecting power to the Ethernet port will damage the board.