ICD-1500-Adapter-Boards
© SightLine Applications, Inc.
17
Table 13: 1500-mAB Connector Descriptions
Connector J1: Analog Video Input
NTSC and PAL analog video input.
Connector J3: Analog Video, Power, Serial 0,
Ethernet
This port uses the standard pinout defined in
Connector J4: Analog Video Output
NTSC analog video output.
Connector J6: 10/100 Base-T Ethernet
Provides 10/100Base-T access using a standard Ethernet modular jack.
Pin
Signal Description
Pin Signal Description
1
TX+
WHITE
5
NC
2
TX-
ORANGE
6
RX-
GREEN
3
RX+
GREEN + WHITE
7
NC
4
NC
8
NC
Connector J7: FFC Digital Video Connector
*
VIOSEL out must match the camera voltage
level for Digital Data, Pixel Clock, Line Valid and
Frame Valid signals. This is +3.3V level for most
cameras. This is used by the 1500-OEM for level
translation.
This connector is used to connect the board to various cameras using an
FFC cable with a custom FFC-XXX board on the other side, where XXX
stands for the individual camera being used.
Pin
Description
Pin
Description
1
Camera TX
2
Camera RX
3
NC
4
NC
5
Ground
6
Digital Data 13
7
Digital Data 12
8
Digital Data 11
9
Digital Data 10
10
Digital Data 9
11
Digital Data 8
12
Digital Data 7
13
Digital Data 6
14
Digital Data 5
15
Digital Data 4
16
Digital Data 3
17
Digital Data 2
18
Digital Data 1
19
Digital Data 0
20
Ground
21
Pixel Clock Out
22
Frame Valid
23
Line Valid
24
NC
25
NC
26
VIOSEL out (to OEM)*
27
+5V Camera power in
28
+5V Camera power in
29
Ground
30
Ground
Connector J12: Analog Video Output
NTSC analog video output
Connector J8: Power + RS-232 Serial Port 0
Pin
Signal Description
1
Power 4.5V - 5.5V
2
GND
Ground
3
TX 0
RS-232C level serial port. Share ground with PIN 2.
4
RX 0
