ICD-1500-Adapter-Boards
© SightLine Applications, Inc.
13
Table 8: 1500-Sony
/
Tamron Connector Summary
Label
MFG Part Number
Function
Mates with:
J1
KEL USL00-30L-A
Digital camera data to Sony
USL20-30SS-010.0-C
1
J2
4-Pin Molex 53398-0471
Power
Molex 51021-0400 / SLA-CAB-0401
J3
3-Pin Molex 53048-0310
3.3V TTL Serial 2 direct to Sony
Molex 051021-0300 / SLA-CAB-0302
J4
Hirose DF12B-50DS-0.5V(86)
Digital video connector
SLA-1500-OEM J4 DF12B-50DP-0.5V (86)
J5
2-Pin Molex 53047-0210
3.3V GPIO
Molex 051021-0200 / SLA-CAB-0202
J6
3-Pin Molex 53047-0310
3.3V TTL Serial 1 to 1500-OEM
Molex 051021-0300 / SLA-CAB-0303
J7
5-Pin Molex 53261-0571
3.3V TTL I2C connector
Molex 051021-0500 / SLA-CAB-0502
1
The KEL ribbon cable length should be as short as possible to ensure video quality and reduce EMI susceptibility. SightLine
provides a 10cm cable with camera interface kits. A KEL cable length greater than 15cm is not recommended. There are
COTS sources for alternate length KEL cables to help with custom integrations.
Table 9: 1500-Sony
/
Tamron Connector Descriptions
Connector J1: Digital Camera Data to Sony
See Sony or Tamron technical reference manuals for more information
and pinout details. See KEL ribbon cable note in
Table
8
above.
Connector J2: Power and Ground
Use with SLA-CAB-1504 or similar.
Pin
Signal
Description
1
Power +12V
Provides power to the camera and the
1500-OEM. Powering the OEM through the
J3 power pins and through the 1500-Sony
board can damage the OEM.
2
3
Ground
4
Connector J3: Serial Port 2
This port uses the standard pinout defined This serial port uses the
standard pinout defined in
Appendix - Standard Connector #1
. This
connector allows serial commands to be sent directly to the camera.
When using this connector to talk directly to the camera, in Panel Plus set
Serial Port 2 to
Port Not Used
.
Connector J4: Mates to 1500-OEM J4
This port uses the standard pinout defined in
. The 1500-OEM plugs directly onto this connector.
Connector J5: GPIO Port
This port uses the standard pinout defined in
. Connects to GPIO173.
Connector J6: Serial Port 1
This port uses the standard pinout defined in
. The voltage levels are 3.3V TTL.
Connector J7: I2C Port
This port uses the standard pinout defined in
. The voltage levels are 3.3V TTL. This port can be used for
controlling accessories such as lenses.
