EAN-SCD-Cameras
© SightLine Applications, Inc.
2
4.1
3000-OEM Mini Blackbird Camera Bench Setup
Interface and adapter boards:
•
: SCD Mini Blackbird camera and SLA-3000-CLK interface.
•
: SCD Mini Blackbird camera and
•
: Provides serial and network interfaces. Adapter boards can be connected to one of
two available video input connectors (VIN1 or VIN0). See the 3000-OEM
drawing for more connection layout information.
VIN0 has camera channels 0 and 1 assigned. VIN1 has camera channels 2 and 3 assigned. If the
configuration includes an analog board with a digital adapter board the analog board must be
installed on VIN0.
•
(optional smaller IO board): Provides serial and network interfaces. This board
allows SLA-3000-CLK board to be connected directly to the OEM board.
Cable connections:
•
SLA-CAB-K010: Connects to the SLA-3000-CLK board and to the SCD Mini Blackbird camera.
Provides serial communication and video to the camera. See the
precautions.
•
SLA-CAB-0403: Connects to J4 on SLA-3000-mIO board. Provides an RJ45 Ethernet connection.
•
SLA-PWR-C12V (110-250VAC input / 12VDC output): Connects to J5 on SLA-3000-IO board.
•
SLA-CAB-1504 / SLA-PWR-B12V (110-250VAC input / 12VDC output): Connects to J9 on the SLA-
3000-mIO board.
Power and network connectivity LEDs:
•
A green light on the 3000-IO or 3000-mIO board indicates that all boards are powered on. An
amber light on the 3000-OEM board verifies network connection.
Figure 1: 3000-OEM
/
SLA-3000-CLK - SCD Mini Blackbird Camera Bench Setup
SLA-3000-IO +
3000-OEM
Boards (stacked)
Network Switch
or PC Direct
SLA-PWR-C12V
RJ45 Ethernet
SLA-3000-CLK
on VIN1
SLA-CAB-K010 (KEL)
Network Switch
or PC Direct
SLA-CAB-0403 (J4)
SLA-3000-OEM +
SLA-3000-mIO
SLA-3000-CLK on J4
SLA-3000-mIO
on J1
SLA-CAB-K010 (KEL)
SLA-PWR-B12V
RJ45 Ethernet
SLA-CAB-1504 (J9)
IMPORTANT:
Disconnect all input power
to OEMs and adapter boards before
connecting or disconnecting cables.
SLA-SCD-100
SCD Mini Blackbird
Direct connect
to camera.
Camera PWR
