Sigfox WSSFCEX-PPS, User Manual

Page: 11 / 23

Parameter Description Possible values Default value
Length
(in bits)
HIGH_ALARM_SETPOINT
High alarm setpoint for
calculated value
32-bit float 1000000000 32
LOW_ALARM_SETPOINT_FACTOR
Low alarm setpoint for
calculated value
8-bit unsigned integer
LOW_ALARM_SETPOINT =
HIGH_ALARM_SETPOINT *
LOW_ALARM_SETPOINT_FACTOR
/ 200
0 8
ALARM_ENABLE
Enable/Disable ALARM
event 0b0 = ALARM event is OFF
0b1 = ALARM event is ON
0b0 = ALARM event is OFF 1
ALARM_PERIOD
Period of time to send
ALARM event
0b000 = every 10min
0b001 = every 30min
0b010 = every 1h
0b011 = every 2h
0b100 = every 3h
0b101 = every 6h
0b110 = every 12h
0b111 = every 24h
0b000 = every 10min 3
LED_BUZZER_ENABLE
Enable/Disable LEDs and
Buzzersinteractions for
action
not triggered by the reed
switch
0b1 = LEDs and Buzzers
are ON
1
HEARTBEAT_PERIOD
Period of time to send
HEARTBEAT event
0b000 = every 1h
0b001 = every 6h
0b010 = every 12h
0b011 = every 24h (1 day)
0b100 = every 48h (2
days)
0b101 = every 72h (3
days)
0b110 = every 120h (5
days)
0b111 = every 240h (10
days)
0b011 = every 24h (1 day) 3
MEASURE_PERIOD
Period of time to measure
sensor
0b0000 = every 1s
0b0001 = every 2s
0b0010 = every 5s
0b0011 = every 10s
0b0100 = every 20s
0b0101 = every 30s
0b0110 = every 1min
0b0111 = every 2min
0b1000 = every 5min
0b1001 = every 10min
0b1010 = every 20min
0b1011 = every 30min
0b1100 = every 1h
0b1101 = every 2h
0b1110 = every 3h
0b1111 = every 6h
0b1001 = every 10min 4
TX_REPEAT Sigfox TX repeat
0b0 = Send RF 1 time
0b1 = Send RF 3 time
0b1 = Send RF 3 time 1
CYCLIC_DATA_PERIOD
Period of time to send
CYCLIC_DATA event
0b000 = every 10min
0b001 = every 30min
0b010 = every 1h
0b011 = every 2h
0b100 = every 3h
0b101 = every 6h
0b110 = every 12h
0b111 = every 24h
0b001 = every 30min 3
DEVICE_RESET
Once this parameter is set,
the device shall restart
once after having received
the Downlink.
0b1010 = 0xA = force
device reset
others = do nothing
0b0000 = do nothing 4
DOWNLINK_TYPE Downlink type
4-bit unsigned integer
See Sigfox Downlink tab
0b0000 4
The following is the format of payload data will be sent to Sigfox server. Length is 6 bytes, it is future-proof for
expansion to 12 bytes.
5.6 Configuration Parameters
5.7 Payload Data
5.7.1 Payload Fields