12
PANEL FUNCTIONS & DESCRIPTIONS
9
Front Panel Functions and Descriptions
Front Panel Functions of welder
1. Indicated LED:
Rotate to “ON”, power on; rotate to “OFF”, power off.
2. Voltage display:
Display voltage or other parameters.
3. Current display:
Display current or other parameters.
4. Function key.
*
5. JOB button.
*
6. Program save/delete button
. *
7. Manual gas check button.
8. Cooling mode key
: Press it to select air cooling or water cooling.
9. Welding process select key.
*
10. Trigger mode select key
: Select 2T/4T/S4T/Spot Weld.
*
11. Manual wire feed button.
12. Synergic-material Function.
13. Synergic-diameter Function.
14. Current adjust knob
: Press down it to select parameters, rotate it to adjust current
or parameters.
15. Voltage adjust knob
: Press down it to select parameters, rotate it to adjust voltage
or parameters.
* Denotes more detailed explanation of function to follow.
Front Panel Functions
1. Indicated LED: Rotate to “ON”, power on; rotate to “OFF”, power off.
2. Voltage display: Display voltage or other parameters.
3. Current display: Display current or other parameters.
4. Function key.
5. JOB button.
6. Program save/delete button.
7. Manual gas check button.
8. Cooling mode key: Press it to select air cooling or water cooling.
9. Welding process select key.
10. Trigger mode select key: Select 2T/4T/S4T/Spot Weld. *
11. Manual wire feed button.
12. Synergic-material Function.
13. Synergic-diameter Function.
14. Current adjust knob: Press down it to select parameters, rotate it to adjust current or parameters.
15. Voltage adjust knob: Press down it to select parameters, rotate it to adjust voltage or parameters.
