Subject to change without notice!
Sifam Tinsley Instrumentation Ltd.
Central Buildings, Woodland Close,
Old Woods Trading Estate,
Torquey, Devan, England, TQ27BB
Website: www.sifamtinsley.com/uk
Contact Number: +44(O) 1803 615139
E-mail: [email protected]
Sifam Tinsley Instrumentation
3105, Creekside Village Drive,
Suite No 801,Kennesaw,
Georgia 30144
Contact Number: +1.404.736.4903
Web: www.sifamtinsley.com
2-60-006-00-00575_Rev. A_01/2015
Assembly
1. Ensure a safe work environment during assembly, maintenance and inspection operations. If necessary interrupt
the current supply of the primary conductor and take precautions against unintentional switching.
2.(i) For Split core CT : Open the current transformer and fix it on the primary conductor using the fixing clamps
(mounting material).
(ii) For Window type CT : Bar or cable primary insert through primary cable or bus bar & fix it using mounting screw
assembly.
P1: Direction of power supply
P2: Direction of power source
Attention:
(i) Do not close the current transformer, high voltages may appear on the open secondary leads.
(ii) Check for cleanness of the cut surfaces of the split core
3. Connect the secondary wires of the current transformer with the measuring device (ampere meter, energy meter).
Pay attention to the installation guide of the measuring device.
4. Now fasten the current transformer, press until the lock engage.
5. If necessary, start the current supply again.
6. Check whether the current transformer is assembled correctly and the secondary leads are connected properly.
7. For split core CT, use “lock pin” supplied along with CT to protect accidental opening of CT, during in use.
L
N
P
1
P
2
S
1
S
2
R
L
A
Wiring diagram
Environmental instruction
When the product has reached it´s “end of life“, it must be recycled. Pass it to an electrical waste disposal. Do not
dispose as unsorted municipal waste!
This product was developed and manufactured in
accordance with the applicable regulations
(IEC 61010, IEC 61869) and meets the requirements
of the low voltage guideline 2006/95/EG
