EN
18
Designation
Description
L1
L2
k
Z1
M
ALI
B1...B4
The upper (main) line of the display has 6 characters
used to display a measuring value or a parameter va-
lue during the meter configuration.
The lower (auxiliary) line of the display has 5 charac-
ters used to display a measuring value, not converted
by the individual characteristic or, according to configu-
ration, a unit or current time.
The kilo symbol means that the displayed value is divi-
ded by a thousand, e.g. when the setting is displayed,
the illuminated symbol means that the given value is
a thousand times greater. For example, 1.2 kA means
12 A
Measuring value averaging indicator. Illuminated ave-
raging indicator informs that the set measuring value
averaging period has not elapsed yet.
The mega symbol means that the displayed value is
divided by a million, e.g. when the setting is displayed,
the illuminated symbol means that the given value is
a million times greater. For example, 3.5 MW means
3,5, W.
Alarm status field. This field contains the indicator infor-
ming about the alarm status. Illuminated alarm indicator
means that an alarm event is in progress and the relay
corresponding to the alarm is activated. Flashing symbol
means that the alarm state is saved (if the alarm memory
is activated).
Meter operation buttons. The description of the button
functions and their various combinations are shown in
section 5.2.(see full version of service manual - avai-
lable at
www.sifamtinsley.co.uk
)
Summary of Contents for N32P
Page 31: ......
Page 32: ...N32P 07 09 60 006 00 00978 ...
