Sifam Tinsley N20ZPLUS, User Manual, Page: 4 / 19

N20Z
PLUS
-
User’s Manual
3
2. METER SET
Complete set of the Analyzer includes:
- N20Z PLUS meter 1 pc.
-
User’s manual
1 pc
- clamps to fix the meter in the panel 4 pcs.
3. Basic requirements, operational safety
Meaning of the symbols used in this manual:
Warning!
Warning of potentially dangerous situations. It is especially
important to read and understand these instructions before
connecting the device. Failure to meet the instructions that are
marked with this symbol can result in serious injury of
personnel and damage to the device.
Caution!
Generally useful notes. Following these instructions ensures
easy operation of the device. The user must take them into
account when the operation of the device does not meet the
user’s expectations.
Possible consequences when these instructions are not
followed!
In terms of operational safety the meter meets the requirements of EN 61010-1.
Safety instructions:

The assembly and the installation of the electrical connections may be carried
out only by a duly qualified electrician.

Before turning on the meter verify the connections.

Removal of the meter housing during the warranty period voids the warranty.

The device is intended for installation and use in industrial electromagnetic
environments.

A switch or a circuit-breaker should be installed in the building or facility. It
should be located near the device, easily accessible to the operator, and suitably
marked.
4. Fitting
The meter has separable strips with screw terminals which enable the
connection of external wires of 2.5 mm2 cross-section. In the version for current
measurement, the plug enables a permanent fixing to the socket by means of
screws.