56
Control and Navigation Keys
Display
Display State Description
ENET (PowerFlex 525 only)
Off
Steady
Adapter is connected to the network and drive is controlled
through Ethernet.
Flashing
Adapter is connected to the network but drive is not controlled
through Ethernet.
LINK (PowerFlex 525 only)
Off
Steady
Adapter is connected to the network but not transmitting data.
Flashing
Adapter is connected to the network and transmitting data.
LED
LED State
Description
FAULT
Flashing Red
Indicates drive is faulted.
Key
Name
Description
Up Arrow
Down Arrow
Scroll through user-selectable display parameters or groups.
Increment values.
Escape
Back one step in programming menu.
Cancel a change to a parameter value and exit Program Mode.
Select
Advance one step in programming menu.
Select a digit when viewing parameter value.
Enter
Advance one step in programming menu.
Save a change to a parameter value.
FWD
FWD
ENET LINK
EtherNet/IP
Menu Parameter Group and Description
Basic Display
Commonly viewed drive operating conditions.
Basic Program
Commonly used programmable functions.
Terminal Blocks
Programmable terminal functions.
Communications
Programmable communication functions.
Logic (PowerFlex 525 only)
Programmable logic functions.
Advanced Display
Advanced drive operating conditions.
Advanced Program
Remaining programmable functions.
Network
Network functions that are shown only when a comm
card is used.
Modified
Functions from the other groups with values changed
from default.
Fault and Diagnostic
Consists of list of codes for specific fault conditions.
AppView and CustomView
Functions from the other groups organized for specific
applications.
PowerFlex 523
PowerFlex 525
9.5. DISPLAY AND CONTROL KEYS
Adapter is not connected to the network.
Adapter is not connected to the network.
For more information contact: Sievert Crane and Hoist, (708) 771-1600, [email protected], www.sievertcrane.com
