USER GUIDE
www.SierraTeck.com
SMARTSOUND - MOTION ACTIVATED AUDIO PLAYER
7
1.
Attach to wall:
Attach to wall directly or through included ball mount, either method can be used
Using ball mount method allows you to adjust detection area while unit is in place
Back of unit has 4 screw holes. Regardless of installation method chosen, only bottom 2
holes are used, upper ones are left unused
Directly to wall:
Screw 2 screws provided into wall and attach unit by the bottom 2 screw holes
OR
Using ball mount
:
Screw part #5A into wall using 2 screws provided
Insert part #5B into bottom 2 screw holes at back of unit
o
Pongs should be pointing up when inserted and pushed up firmly into place
Firmly push unit into part #5A attached to wall until the ball snaps into socket
To detach from wall, pull unit firmly to detach part #5A from part #5B
2.
Adjust Sensor Angle and/or Unit (if desired, applicable only to Ball Mount Installation
Method)
o
To adjust area targeted for detection, rotate sensor head (top portion of unit) left or
right
o
Can also grap unit itself and swivel 360° degrees
