background image

 

USER GUIDE 

 

 

 

www.SierraTeck.com

  

RECORDABLE MOTION ACTIVATED VOICE PLAYER WITH BUILT-IN MICROPHONE

 

[email protected]

 

 

 

Security System

 

o

 

Play audio of your choice as soon as motion is detected 

 

Daily Reminder

 

o

 

Record audio messages for family and leave beside fridge or oven: 
“Honey, food is in the oven, warm for 20 minutes before eating”  
“Don’t forget to turn down the heat before you leave” 

Frequently Asked Questions 

Q: How do I increase playback time? 

Playback time is fixed. If you need longer recording time, check out our “SmartSound” device, 
details are on our website at 

www.sierrateck.com

  

Q: During use, playback gets interrupted then continues to play and this repeats  

This is caused by an unstable voltage and indicates that the battery is low. Replace the battery 

Q: After the unit is powered on, there is a period of time where there is no response or 
delayed response.  

After power on, there will be 5-10 seconds of power initialization time. During this period, it is 
normal to have no or slow response. After this time, the unit will work normally 

Q: How do I delete what I recorded? 

Every time you do a new recording, it automatically overwrites your old recording. 

Q: Can I record multiple recordings instead of 1 long recording? 

No, only 1 recording is supported. This feature is available in our “SmartSound” device, details 
are available on our website at 

www.sierrateck.com

  

Customer support & Warranty 

We are here to help! If you have any questions or feedback, simply email us at 

[email protected]

 . Your feedback and suggestions are always welcome and help inspire 

future products. This unit comes with a 1-year warranty. If the unit is found defective, we will 
replace the unit at no cost to you or issue a full refund. Tampering with the internals of the unit 
or using the unit outdoors will void the warranty.  

Limited time offer: 

Register your product online within 21 days of your order 

and receive a 10% off coupon for 

future SierraTeck purchases, 2 months warranty extension, and exclusive access to future 
products at deep discounts. 

It takes less than 60 seconds, register here:  

http://www.sierrateck.com/registration.html

 

 

Summary of Contents for MicroSound








Reviews: