A. Precautions
1. Volume Level Adjustment
When driving, Keep the volume level low enough to be aware of road and traffic conditions.
2. When Car Washing
Do not expose the equipment, including the speakers and CDs, to water or excessive moisture.
This could cause electrical shorts fire or other damage.
3. When parked
Parking in direct sunlight can produce very high temperatures inside your vehicle, Give the
interior a chance to cool down before switching the Unit on.
4. Use the proper power Supply
This equipment is designed to operate off a 12 Volt, negative ground battery system (the normal
system in a North America Car.)
5. Use Authorized Service
Do not attempt to disassemble or adjust this precision equipment. Please contact to Authorized
Service Center to be repaired and proper treatment by specialist.
B. Cautions on Proper Handling
1. Since this unit is quite heavy, be sure to grip both sides securely before attemption to move it.
2. If this unit is operated at a high output continuously, the uper side of the unit will get very hot.
Do not thouch it nor place anything on top of the unit.
3. When the temperature becomes abnormally hot, the heat protection circuit operated and the
operation will temporarily stop. In this case, switch off the unit and allow the unit to cool down.
Decrease the volume level before turning the unit on again.
4. When a short circuit occurs, such as in ther speaker output terminal, etc. The overload protection
circuit will operate. This circuit protects the power amplifier from further damage when a short
circuit occurs. Operation will termporarily stop. In this case ,check the cause of the short-circuit
and if the problem is fixed, normal operation will resume.
C. Installation Cause
Be sure to carefully read and understand the instructions before attempting
to install the Amplifier.
1. Mounting Location
The mouting location and position of your amplifier will have a great effect on its ability to dissipate
the heat generated during normal operation. The design of our aluminum heatsink serves to
easily dissipate the heat generated over a wide range of operationg conditions. However, to
maximize the performance of your amplifier, care should be taken to ensure adequate ventilation.
