Sierra SRCO, Operator'S Manual

Page: 20 / 39

ADJUSTING DOOR SWITCH
The door switch detects when the oven doors are open. As adjusted at the factory, when the doors are
opened more than 2 to 4 inches, the burners and fan should shut off (unless the fan is switched
to “COOL”
mode). To adjust the door switch, do the following:
1. Remove lower front panel that covers the door chain mechanism.
2. Close both doors.
3. Check that the door switch cam is operating the door switch.
!
CAUTION
Do NOT adjust the door switch so that the plunger arm is completely depressed and is hitting the switch
body. This could distort the arm and cause the switch to operate poorly.
TEMPERATURE CONTROLLER
Temperature controller is set at the factory and should only be changed or adjust by a qualified service
technical.
20