Chapter 4 Maintenance
Series 810 Instruction Manual
Caution!
Do not remove the sensor
cover, this could shift
transducer calibration.
Figure 4-1. Stainless Steel Low Flow Transducer Internals
Figure 4-2. Stainless Steel Medium Flow Transducer Internals
Figure 4-3 Nylon Transducer Internals
Sensor Maintenance
The sensor tube is straight and has a relatively large, 0.031 inch ID.
On the nylon flow body instruments, there is no access to the
sensor, so any service must be performed by a qualified Service
Center. The stainless-steel flow bodies, however, are provided with
convenient access ports to make inspection and cleaning easy.
Sensor maintenance on these steel-body instruments consists of
inspecting and cleaning the sensor flow path.
4-2
IM-81
