Sierra Instruments Instruction Manual
Smart-Trak
®
2 Series 100
55
Establishing Communication
If the Screen appears with all the yellow and white boxes full, the Smart-Trak 2
instrument has established communication with your computer.
Proceed to the next section.
If the screen appears, but the yellow and white boxes are all empty, you have
selected the wrong “Com Port number.” See the section titled “Com Port” on page
5-16 for instructions on how to change the communication port number.
If the screen appears, but only the Mass Flow box shows a value, you are using the
correct Com Port, but your computer is not talking to the Smart-Trak 2. To begin
communication, move the mouse pointer to the top center screen and left click on
the words “Get Parameters.” then values will fill all the boxes on the screen.
Communication has been established. Your computer is now able to control your
Smart-Trak 2 instrument.
Your Smart-Trak 2 instrument is now ready for use!