Rev 1.0 Mar.10
31
Figure 0-8: PassThru mode
Tip:
PassThru can only be exited by resetting or power-cycling the modem. This mode
cannot be entered via a remote Telnet session.
You can configure a string of AT commands to be sent to the MP 597 when it
enters PassThru and other PassThru settings.
PassThru Mode allows only specific AT commands. Some ALEOS commands will
be unavailable when the MP 597 is in PassThru mode. The commands usable
also depend heavily on the modem model number (found on the label on the top
of the MP 597).
Note: Some internal hardware requires upwards of 20 seconds before AT commands can
be entered, so be patient if there seems to be no response to AT commands.
Summary of Contents for MP597
Page 1: ...CoverTitle AirLink MP597 Quick Start Guide for Verizon ...
Page 2: ......
Page 13: ......
