Sierra Wireless AirLink LX40, Hardware User'S Manual

Page: 15 / 62

Installation and Startup
Rev. 2 January 2021 15 41112510
Figure 2-3: Ground connector
Flat Mount
To mount the LX40 permanently to any surface or if you are mounting the LX40 on a DIN
rail, order an LX40 mounting bracket kit (P/N 6001221) from Sierra Wireless. The kit
contains:
• Mounting bracket
• DIN rail clip (35 mm EN 50022) (see DIN Rail Mount on page 17)
• Screws for attaching the DIN rail clip to the mounting bracket
To mount the LX40 on a flat surface:
1. Attach the bracket to the mounting surface, using the attachment points shown in
Figure 2-4 .
Figure 2-4: Mounting Bracket, showing attachment points
2. Snap the LX40 onto the bracket (see Figure 2-5 on page 16).
a. Angle the LX40 with the antenna connectors downwards, and fit the bracket
clasps against the indentations on the end of the LX40. The raised edge of the
bracket should match the rounded corner of the LX40.
b. Bring the other end of the LX40 down onto the bracket and snap it into place. The
bracket clasps should fit into the indentations on the end of the LX40.
Grounding point
Holes are Ø 4.3 mm (M4 compatible;
use hardware appropriate for your
mounting surface)