Rev 3 Nov 17
19
4119855
4
4: Basic Configuration
Admin Password
Important:
Sierra Wireless strongly recommends that you immediately change the Admin
password from the default value to prevent unauthorized use of the system.
To change the default password of the admin account, use the following commands:
admin@ACM:~# set system login user admin authentication
plaintext-password <PASSWORD>
admin@ACM:~# commit
Note: Once the change is committed, the password is encrypted and is no longer available in
plain text.
Host Name
To change the ACM’s default hostname, use the following commands:
admin@ACM:~# set system host-name <HOST-NAME>
admin@ACM:~# commit
Domain Name
To change the ACM’s domain name, use the following commands:
admin@ACM:~# set system domain-name <DOMAIN-NAME>
admin@ACM:~# commit
OUTSIDE Interface IP Address
To change the IP address of the OUTSIDE interface, use the following commands:
admin@ACM:~# set interfaces ethernet eth0 address <WAN-IP-
ADDRESS/SUBNET-BITMASK>
admin@ACM:~# commit
Default Gateway
To change the default gateway, use the following commands:
admin@ACM:~# set system gateway-address <DEFAULT-GATEWAY-IP-
ADDRESS>
admin@ACM:~# commit
