Sierra Video MADI Series, User Manual

Page: 45 / 54

MADI-XX
39
Initial Setup
Both CONFIG-xx and DISPLAY-xx use IP addresses to communicate with frames. If desired,
IP settings can be entered directly via each MADI-xx/AM-xx on-screen menu.
Alternatively, CONFIG-xx can be used to search for MADI-xx/AM-xx frames on the network by
entering the
Network Setup page within its Utilities menu. The current MADI-xx/AM-xx network
settings can then be changed within Network Setup .
MADI-xx/AM-xx frames may be addressed by CONFIG-xx by selecting the IP address of each
frame in turn and adding them to the frame list.
When several frames are integrated via CONFIG-xx, they will appear within both software
applications as one system rather than as separate frames. For example, audio channels will
appear in numerical sequence starting with channel 1 of frame 1. In a system with four fully
populated AM-xx frames, channel 64 of frame 4 will appear as channel 256.
Before using CONFIG-xx to edit MADI-xx/AM-xx frame settings, it is strongly recommended that
all current configuration settings are saved. This can be done by allowing CONFG-xx to obtain
the frame’s current settings and saving them as explained in the online help file.
Use the online help facility for each application for further information.