User Manual
41
press “OK” to highlight the icon Area analysis first and then press “Menu” to select it.
•
In saved images, area analysis can be done when the images are replayed. Bring up the replay toolbar with the touch pen or buttons. Click
the icon “Area analysis” with the touch pen to select it; or press “OK” to highlight the icon Area analysis first and then press “Menu” to select
it.
•
4 areas can be displayed on the screen. Clicking with the touch pen or pressing “Pic Mode” can toggle between them. Temperature of the
selected area as well as the temperature measurement type, Minimum, Average or Maximum will be displayed in the status bar under the
image screen.
•
To move each area after selecting it, click at its center with the touch pen, move it to a desired position and then release it; or press the
buttons “Up”, “Down”, “Left” or “Right” to a desired position and then release it. The temperature displayed in the status bar will accordingly
change.
•
To change the size of an area after selecting it, click at one of its four corners with the touch pen, drag the corner to a desired position and
then release it. Or select the area and press button “OK”, then use “Up”, “Down”, “Left”, and “Right” to adjust the size of area and then
release it.
•
Areas can be set to display the Maximum, Average or Minimum temperature. This is done by setting the value of Area Func in option
Analysis under submenu Setup and then choosing button OK to confirm the setup.
