6
f)
Open Device Control
g)
Set Visibility to "Expert"
h)
Scroll Down approximately 3/4 of the way towards the bottom of the GEV Device list and find
the SignalRouting section. PlcEquationApply will be blank.
i)
If, PlcEquationStatus reads: “LUT now out of sync with PlcEquations: PlcEquationApply required”
then Click on the PlcEquationApply section to reveal the PlcEquationApply button. Click on this
button, the PlcEquationStatus should now read: “ok”.
Close the Device Control window
_
X
_
.
f
h
i
g