![Sierra Flame BL-936 Installation And Operating Instructions Manual Download Page 30](http://html1.mh-extra.com/html/sierra-flame/bl-936/bl-936_installation-and-operating-instructions-manual_1266524030.webp)
Page 30 of 53
3.3.6 GLASS INSTALLATION / VERRE D'INSTALLATION
Step 1.
Sprinkle burner channel with glass../
Canal du brûleur Saupoudrer de verre.
Step 2
Install the door see instructions below. Make sure to cover the burner pan evenly / Installez la porte
voir les instructions ci-dessous.
Assurez-vous de couvrir la casserole du brûleur régulièrement
Turn your fireplace on and wait approximately 10-15 minutes until the flames are a nice yellow colour.
Note the flame pattern and in any low or high areas adjust the amount of river glass to correct gas
flow. / Transformez votre cheminée et attendez environ 10-15 minutes jusqu'à ce que les flammes
sont une belle couleur jaune. Notez la forme de la flamme et dans tous les domaines à basse ou
haute ajuster la quantité de verre rivière pour corriger débit de gaz.
WARNING
AVERTISSEMENT
YOU MUST WEAR FLAME AND HEAT RESISTANT GLOVES FOR THESE ADJUSTMENTS.
VOUS PORTER DES GANTS DE FLAMME ET RESISTANT A LA CHALEUR DE CES
AJUSTEMENTS.
3.3.7 DOOR INSTALLATION AND SAFETY SCREEN / INSTALLATION DE LA PORTE ET ÉCRAN DE SÉCURITÉ
Place the bottom of the door into the Bottom Door Channel, with your fingers grasp the door latch and
pull up and over the door bracket to seal the door shut /
Placez le bas de la porte dans la Manche
Bas de porte, avec vos doigts saisissent le loquet de la porte et tirer vers le haut et sur le support de
la porte pour sceller la porte fermée