INSTRUCTIONS FOR USE
The Steamer is designed to thoroughly clean floor surfaces, such as marble, ceramic,
stone, linoleum, sealed hard wood floors and parquet.
WARNING: ON SURFACES THAT HAVE BEEN TREATED WITH WAX, THE WAX
MAY BE REMOVED BY THE HEAT AND STEAM ACTION. DO NOT USE ON
UNSEALED WOOD FLOORS OR LET UNIT STAND ON ANY WOOD FLOOR FOR AN
EXTENDED PERIOD OF TIME. THIS COULD CAUSE THE WOOD GRAIN TO RISE.
IT IS THEREFORE RECOMMENDED THAT A SAMPLE CLEANSING BE CARRIED
OUT ON AN ISOLATED AREA OF THE FLOOR. IT IS ALSO RECOMMENDED THAT
YOU CHECK THE USE AND CARE INSTRUCTIONS OF THE SURFACE FROM THE
FLOOR MANUFACTURER TO ENSURE SUITABILITY TO STEAM CLEANING.
For first time use of the machine, please hold onto the switch to allow the
water to get pumped to the steam chamber. The pump will make a louder
noise during this initial operation.
HOW TO ASSEMBLE AND USE
1)
Attach steamer head to steamer body.
2)
Secure steamer head with the small Philips Head Screw until is fully tighten.
3)
Insert steamer handle down into the steamer body.
4)
Screw the Large Philips Head screw through the opening at the back of steamer
body into the rear of the steamer handle and tighten until secure.
5)
Place the steamer head in Cloth Pad, and secure the Pad by pulling the cord while
pressing on Toggle.
NOTE: Do not operate without a floor cloth in place.
3
