NOTE: The steamer does not require distilled water. Residents in areas with hard water
should used distilled water for better performance.
6) Twist the quick release cord wrap clockwise to un-wrap the power cord completely.
Hang the cord on the handle cord wrap for better use of the steamer when moving
and cleaning.
7) The LED will illuminate when the steamer is ready for cleaning.
NOTE: It is recommended that another high wattage appliance is not operated on the
same circuit to avoid a circuit overload.
WARNING: ON SURFACES THAT HAVE BEEN TREATED WITH WAX, THE
WAX MAY BE REMOVED BY THE HEAT AND STEAM ACTION. DO NOT USE ON
UNSEALED WOOD FLOORS OR LET UNIT STAND ON ANY WOOD FLOOR FOR AN
EXTENDED PERIOD OF TIME. THIS MAY CAUSE THE WOOD GRAIN TO RISE.
IT IS RECOMMENDED THAT A SECTION BE TESTED IN AN ISOLATED AREA OF
THE FLOOR. IT IS ALSO RECOMMENDED THAT YOU CHECK THE USE AND CARE
INSTRUCTIONS FOR CLEANING FROM THE FLOOR MANUFACTURER TO ENSURE
STEAM CLEANING IS ACCEPTABLE FOR YOUR FLOOR.
8) Pull down on handle to release and unlock steam for use. To stop steam, simply
push handle back to upright and locked position.
9) Slowly pass over surface to be cleaned when steam is emitted. It is recommended
to sweep or vacuum floor prior to using the steam mop.
10) For maximum use of your unit, press button on lower handle tube to release the
handle from the steamer body. Use the newly converted handheld steamer on all
surfaces vertically and horizontally for your cleaning and sanitizing needs.
8
10
5
