STORING AND MAINTENANCE
CAUTION: Prior to storing or maintaining your steam press, isolate the unit
by removing the cord from the power socket and avoid immersing the unit in
water.
1) Water may be left in Water Tank reservoir; however, it is recommended that if the
machine will be stored for a long period of time, any left over water in the unit
should be drained by pressing the Steam Burst Button before the end of use until
the Water Tank is emptied.
2) Wait approximately 30 minutes for press to cool down before storing. Once cooled,
lower the Pressing Plate onto the Ironing Board; pull down Pressing Handle
completely, then turn Locking Knob to locked position.
3) Loosely wrap electrical cord and place it in the Cord Storage Compartment located at
the left of the Water Tank on the base of the Ironing Board.
4) Wipe steamer with soft cloth when/if necessary.
5) Store in a cool, dry place.
CLEANING
1) Fill Water Tank using Water Container Provided.
2) Place the Pressing Cushion in the center of the Ironing Board.
3) Place a clean towel over the Pressing Cushion and the Ironing Board.
4) Set the Fabric Temperature Selection control to the highest setting (linen). When
the Steam Ready Light illuminates, gently lower the Pressing Plate onto the Pressing
Cushion.
100
20
0
30
0
40
0m
l
12
