counterweight easel assembly instructions
4 of 5
Add weights to the weight box.
TIP: First lock the sliding carriage in place with
the 2 locking knobs on the bottom canvas
holder.
NOTE: Weights are not included with
the easel to avoid excessive shipping costs.
The easel uses standard 2-1/2
and 5 pound weight plates. These can
be purchased at any sports equipment store.
Four 5 pound weight plates are required to
balance the easel without the optional lower
canvas holder . Use an additional 2-1/2 pound
weight plates to balance the easel with the
optional lower canvas holder. Add additional
2-1/2 pound weight plates as needed
depending on the size and weight of your
paintings
It may be necessary to occasionally
tighten the guide cables for the weight box.
Hold the brass eye hooks while tightening the
nut with the wrench not included .
NOTE: Do not over tighten the guide cables,
it is not necessary.
manufactured by craftech international inc.
www.siennapleinair.com
7042 Kearny Drive, Huntington Beach, CA 92648 tel: 714-847-8215 [email protected]
