en
Faults and what to do about them
26
Information on the display
panel
Faults and what to do about
them
Display
Cause/Remedy
è
flashes
Please close the door immediately because of rising water level; in pause sta-
tus,
è
flashes fast and sound an alarm. Please close the door; Door cannot be
locked/unlocked due to high temperature of the door lock coil. Wait a moment
and try again. Or switch off the machine, then switch on the machine again in 5
seconds. The machine can be locked/unlocked.
|
Open the tap.
Inlet filter blocked. Clean filter
Supply hose kinked or blocked.
E:32
Alternating display with
End
when programme is finished, indicating the laun-
dry inside are unbalanced. The washing machines’ unbalanced load detection
system can not adjust the imbalance.To protect the mechanical systems, the
machine will not achieve the highest spin speed, and the laundry can not be
spinned completely. Please wash small and large items of laundry together.
E:18
Clean detergent solution pump
outlet pipe/drainage hose blocked, clean it.
Other displays
Switch off the appliance, wait 5 seconds and switch it back on.
If the display appears again, call the after-sales services.
Faults
Cause/Remedy
Water is running out.
■
Fit/refit drainage hose correctly.
■
Tighten screw–fitting on the supply hose.
Water not flowing in.
Detergent not washed in.
■
䄒㯝倍橵
I
(
Start/Pause
)
not selected?
■
Tap not open?
■
Filter blocked? Clean filter.
■
Supply hose kinked or jammed?
There is water in the drum?
Washing machine door
cannot be opened.
■
Safety function active. Stop programme?
■
- - - - (Rinse stop= without final spin) selected?
■
Can be opened via emergency release only.
■
Childproof lock activated? Deactivate childproof lock.
Programme does not
start.
■
䄒㯝倍橵
I
(
Start/Pause
)
or
窖悸
û
(
Finish in
) selected?
■
Washing machine door closed?
Additional function could
not activate for selected
programme.
■
If the additional function is selectable?