en
Cleaning and maintenance
24
Drainage hose on the siphon
blocked
1.
Turn the programme selector to
$
ڌ→
(
Off)
. Pull out the mains plug.
Note:
Residual water may run out!
2.
Loosen hose clip, carefully remove
drainage hose.
3.
Clean drainage hose and siphon
spigot.
4.
Re-attach drainage hose and secure
connection point with hose clip.
Filter in the water inlet hose
blocked
First, release water pressure in the
supply hose:
1.
Turn off the tap!
2.
Select any programme (except
অ㝡≤
(
Spin)
programme).
3.
Select
䄒㯝倍橵
I
(
Start/Pause
).
Leave programme for
approx. 40 seconds.
4.
Switch off the appliance. Pull out the
mains plug.
5.
Clean the filter:
Disconnect the hose from the water
tap.
Clean filter with small brush.
and/or:
Remove hose from the rear of the
appliance.
Take out filter with pliers and clean.
6.
Connect the hose and check for
leaks.