Specifications
Operating Voltage Range: 13-32 Vdc
Max average operating current @ 24v: 500µA
Operating temperature range: 32 TO 120 F (0 TO 49 C)
Operating humidity range: 0 to 95 % RH
Construction: High impact polycarbonate plastic
Construction: Aluminum
Shipping weight: 1.0 lbs.
Dimensions:
5.50” H x 4.0” W x 1.250” D
ADA Compliant
Compatible electrical boxes: 2-
1/2” deep 1-gang box
Optional Accessories
Surface mounted box, P/N S54321-F20-A1
Adapter plate for the existing SB-5R Surface mounted boxes P/N
S54321-F21-A1
Adapter
plate for 4” square boxes and 2-gang boxes P/N
S54321-F22-A1
Carton Contents
1. Manual station
2. Two mounting screws
3. One Siemens T45 key
4. Installation Instructions
Installing the manual station
The XMS series manual stations are shipped fully assembled
from the factory.
Installation Instructions:
1.
Remove the cover
. Insert the Siemens T45 key
provided into the key lock and rotate key 90 degrees
counter-clockwise. Remove the key. The cover can
now be removed.
2. Make all wiring connections as shown in the wiring
diagrams Figure 2 or 3.
3. Using the two 6-
32 x ½” machine screws provided
mount the manual station base to the electrical box
.
CAUTION
:
Use very low torque to prevent the
base from becoming distorted. If the base is
distorted, the front cover will not operate. If this
happens, remove cover and loosen the mounting
screws accordingly.
4.
Replace the cover:
Place the cover inside the base,
insert the key back into the lock and rotate key
clockwise 90 degrees to move the cam down to lock
the cover in place and push cover down until is flush
with the top surface of the base. Remove the key. The
manual station is in normal operating position.
5.
To test:
Pull cover down to alarm position then check
to see if the cover is locked down. Insert the key to
reset. The cover should move back to normal
position.
Figure 4
Mounting the XMS Series
A6V11856080_enUS_a
FRONT COVER
KEY LOCK ASSY
BASE
COMPATIBLE
ELECTRICAL
1-GANG BOX
LED LIGHT PIPE
6-32 X1/2 SCREWS
(2) PLACES
CAUTION: Do not overtighten the screws.
Overtightening may distort the Base.
firealarmresources.com
