manualshive.com logo in svg

Siemens WTV676-HB6035, Manual, Page: 11 / 16

Share
Download
Siemens WTV676-HB6035 Manual Download Page 11

11 

Siemens 

 

A6V11157961_en--_d 

Building Technologies 

 

2018-07-24 

 

Installation 

Note on leakage current protection. 
Applies to devices with supply output (AC 24 V or mains voltage) such as a triac output or 

output to power a field device.  

 

 

 

WARNING 

No internal line protection for supply lines to external consumers 
Risk of fire and injury due to short-circuits! 

●

  Adapt the line diameters as per local regulations to the rated value of the installed fuse. 

 

 
The technical data must include the appropriate information on internal or external device 

protection. 

  

Disposal 

 

  

The device is considered an electronic device for disposal in accordance 

with the European Guidelines and may not be disposed of as domestic 

garbage. 

●

  Dispose of the device through channels provided for this purpose.  

●

  Comply with all local and currently applicable laws and regulations. 

●

  Dispose of empty batteries in designated collection points. 

 

 

  

Warranty service 

 
Technical data on specific applications are valid only together with Siemens products listed 

under "Equipment combinations". Siemens rejects any and all warranties in the event that 

third-party products are used. 
 

Summary of Contents for WTV676-HB6035

















Reviews:

No comments