Siemens WT47XKH1ES, User Manual

Page: 55 / 64

Troubleshooting
en
55
Fault Cause and troubleshooting
Pumping noise. Condensation pump active.
▶
Not a fault – normal operating noise.
Buzzing noise. Compressor ventilation active.
▶
Not a fault – normal operating noise.
The drying time is too
long. The base unit's filter is soiled.
▶
→ "Cleaning the filter system on the base unit",
Page 29
The ambient temperature is greater than 30 °C.
▶
Ensure that the ambient temperature is lower than
30 °C.
The ambient temperature is lower than 15 °C.
▶
Ensure that the ambient temperature is above 15
°C.
Insufficient air circulation at the appliance's installation
location.
▶
Ventilate the appliance's installation location.
Insufficient condensation for the automatic self-clean-
ing when permanently drying small loads of laundry.
▶
Regularly dry a load weighing more than 3 kg of
damp laundry until the programme ends.
Insufficient condensation for the automatic self-clean-
ing when permanently using the crease-removal func-
tion.
▶
Regularly dry a load weighing more than 3 kg of
damp laundry until the programme ends.
The appliance's ventilation opening is blocked.
▶
Ensure that the ventilation opening of the appliance
is kept clear.
Heat exchanger is soiled.
▶
Running the basic appliance care programme on
the appliance.
→
"Running the basic appliance care programme
on the appliance", Page 43 .
The base unit filter is damp.
1.
→ "Cleaning the filter system on the base unit",
Page 29 .
2.
Dry the filter thoroughly after cleaning.
3.
→ "Closing the base unit", Page 48 .
4.
→ "Switching off the appliance", Page 29 .
5.
→ "Switching on the appliance", Page 28 .