en
Operating the appliance
30
Changing the programme or
adding laundry
You can remove or add laundry and
change or alter the programme at any
time during drying.
1.
To pause the programme, open the
dryer door or press the Start button.
2.
Add or remove laundry.
3.
Select another programme or an
additional function, if required.
4.
Close the dryer door.
5.
Press the Start button.
Note:
The programme duration in the
display panel is updated depending on
the load and residual moisture in the
laundry. The values displayed may
change after the programme is
changed or the load is adapted.
Cancelling the programme
The programme can be interrupted at
any time; to pause, open the dryer door
or press the Start button.
Caution!
Risk of fire. Laundry may catch fire.
If you cancel the programme, you must
remove the laundry items and spread
them out so that the heat can disperse.
Programme end
“Ÿš
appears in the display panel.
Removing laundry and
switching off the dryer
1.
Remove the laundry.
2.
Press the
#
button to switch the
dryer off.
Emptying the condensate
container
Notes
■
You can drain off the condensation
into the waste-water system using an
optional condensation drain
*
. For
installation, see
■
If you drain the condensation using
an optional condensation drain, you
do not have to empty
the condensate container.
Note:
After each drying cycle, empty
the condensate container; otherwise
the next drying programme may be
cancelled as a result of the condensate
container being full.
1.
Pull out the condensate container
horizontally.
* Depending on the model
