Siemens WT45HVE6DN, User Manual And Installation Instructions

Page: 38 / 48

en
Troubleshooting
38
Fault Cause and troubleshooting
Creasing. The load is too large.
▶
Observe the maximum load capacity of the
→
"Programmes", Page 22 .
The laundry lies in the drum for too long after drying.
1.
Remove the laundry from the drum as soon as the
drying programme has finished.
2.
Spread the items of laundry for cooling.
Unsuitable programme for the type of fabric.
▶
Set the suitable programme for the type of fabric.
→
"Programmes", Page 22
Easy-Care fabrics are dried for too long.
▶
→ "Changing the dryness level", Page 21 .
▶
→ "Adjusting the dryness level", Page 21 .
Anti-Crease not activated.
▶
Activate the Anti-Crease function.
→
"Buttons", Page 19
and programme
terminated.
Condensation tank filled.
1.
→ "Emptying the condensation container", Page 30 .
2.
→ "Inserting the condensation container", Page 30 .
3.
→ "Starting the programme", Page 26 .
Water drain hose is caught or jammed.
1.
Ensure that the water drain hose is not kinked or
trapped.
2.
Route the water drain hose without kinks.
Water drain hose is not connected correctly.
▶
Ensure that the water drain hose is connected cor-
rectly.
Water drain hose is blocked.
▶
Rinse the water drain hose with tap water.
Foreign object is located in the base unit
1.
→ "Opening the base unit", Page 33 .
2.
Remove the foreign objects that are present.
3.
→ "Closing the base unit", Page 35 .
Condensation in the
condensation tank
even though the water
drain hose is connec-
ted. The appliance uses condensation for the automatic
self-cleaning.
▶
Not a fault – no action required.
Water drain hose is not connected correctly.
▶
Ensure that the water drain hose is connected cor-
rectly.