Siemens WT45H2K7DN, Installation And Operating Instructions Manual

Page: 25 / 40

Operating the appliance
en
25
1
Operating
the appliance
Operating the appliance
Loading laundry and
switching on the dryer
Note:
The dryer must be correctly
positioned and connected,
~
Page 12 .
1.
Place the laundry in the drum.
2.
Turn the programme selector to any
programme to switch the dryer on.
3.
Close the dryer door.
Caution!
Possibility of material damage to the
dryer or laundry.
Take care not to trap any laundry in the
door.
Setting a programme
Note:
If you have activated the
childproof lock, you must deactivate it
before you can set a programme, see
~
Page 24 .
1.
Select the required programme;
detailed information on the
programmes can be found on
~
Page 22 onwards.
2.
Use the programme selector to set
the required programme. The default
programme settings for the selected
programme appear in the display
panel.
Note:
Default programme settings
are standard settings that are
already defined when a programme
is selected. After selecting a
programme, you can see the default
programme settings in the display
panel.
3.
If required, adjust the default
programme settings. You can find
detailed information on this on
~
Page 24 onwards.
Starting the programme
Press the Start button.
Note:
If you want to lock the
programme to prevent it from being
adjusted inadvertently, you can select
the childproof lock, see
~
Page 24 .
Programme sequence
The programme status is indicated in
the display field.
e.g.
1:27
Expected programme duration
in hours and minutes.
Note:
When a programme is
selected, the expected drying
time for the recommended load
is displayed. During drying
moisture sensors detect the
remaining moisture in the load
and adjust the programme
length (except timed
programmes). This is visible via
the time remaining leaping
forward.
e
Dry
Ø
Iron Dry
»
Cupboard Dry
Ý
AntiCrease
-
˜
-
Pause
“Ÿš
End