Siemens WQ33G2DMFG, User Manual And Installation Instructions

Page: 29 / 48

The Ministry in essence NL
a The display shows whether the program
maduur or the ready in time
displayed.
a After the program end, it shows
display: "End".
12.9 Fluff filter
During drying, the fluff from the
laundry is collected in the fluff filter.
The fluff filter protects the device
from fluff.
12.5 Adding laundry
Cleaning fluff filter
You can always remove or add the
laundry after the program has started.
1.
on Start/Pause to press.
When the drying program is finished
or if the display shows a message
during use, clean the fluff filter.
The cooling process starts automatically
after approx. 30 seconds and cools the
laundry with a rotating drum. If you
want to avoid or abort the cooling
process, open the door.
→
"Display", page 18
Remark: If you do not clean the
device as described, the device
function may be impaired.
Requirements
s The display shows after drying:
"end"
s or during use: .
2.
Open the appliance door.
3.
Reload or remove the laundry.
4.
Close the appliance door.
5.
Press Start/Pause.
1.
Open the door.
2.
Remove the fluff from the door.
12.6 Program Cancel
1.
on Start/Pause to press.
The cooling process starts automatically
after approx. 30 seconds and cools the
laundry with a rotating drum. If you
want to avoid or abort the cooling
process, open the door.
→ "Display", page 18
2.
Open the appliance door.
3.
Remove the laundry
→ Page 29.
12.7 Remove laundry
1.
Open the appliance door.
2.
Remove the laundry.
12.8 Switching off the device
▶
Set the program selector to .
29