background image

en

    Technical data

54

J

Technical data

Technical data

Dimensions:

84,8 cm x 59,8 cm x 59,0 cm
(height x width x depth)

Weight:

80 kg

Mains connection:

Nominal voltage 220-240V, 50 Hz
Minimum installation protection (

c

)10 

A
Nominal power 1900-2300 W

Water pressure:

100–1000 kPa (1–10 bar)

r

Aqua-Stop warranty

Aqua-Stop warranty

Only for appliances with Aqua-Stop

In addition to warranty claims against 

the vendor based on the purchase 

agreement and to our appliance 

warranty, we will provide compensation 

under the following conditions:

1.

If water damage is caused due to a 

fault in our Aqua-Stop system, we 

will compensate domestic 

customers for the damage caused.

2.

The liability guarantee is valid for the 

service life of the appliance.

3.

It is a prerequisite of all warranty 

claims that the appliance with Aqua-

Stop must have been installed and 

connected correctly in accordance 

with our instructions; this also 

includes a correctly fitted Aqua-Stop 

extension (genuine accessories).

Our warranty does not cover 

defective feed lines or fittings 

leading to the Aqua-Stop connection 

at the tap.

4.

Appliances with Aqua-Stop do not 

need to be supervised during 

operation, nor secured afterwards by 

turning off the tap.

The tap only needs to be turned off if 

you are away from home for a long 

period, e.g. for several weeks' 

holiday.

Summary of Contents for WN44A1E0DN

























































Reviews: