background image

Safety instructions    

en

11

Repairs and any other work 

on the appliance must only 

be conducted by our 

customer service or by an 

electrician. The same applies 

for replacing the mains cable 

(when necessary).

Spare mains cables can be 

ordered from our customer 

service.

:

Warning

Risk of poisoning!

Poisonous fumes may be given 

off by cleaning agents that 

contain solvents, e.g. cleaning 

solvent.

Do not use cleaning agents that 

contain solvents.

:

Warning

Risk of electric shock/material 

damage/damage to the 

appliance!

If moisture penetrates the 

appliance, this may cause it to 

short circuit.

Do not use a pressure washer, 

steam cleaner, hose or spray 

gun to clean your appliance.

:

Warning

Risk of injury/material 

damage/damage to the 

appliance!

The use of spare parts and 

accessories supplied by other 

brands is dangerous and may 

result in injury, material damage 

or damage to the appliance.

For safety reasons, use 

genuine spare parts and 

accessories only.

Caution!

Material damage/damage to 

the appliance

Cleaning agents and agents for 

pretreating laundry (e.g. stain 

removers, prewash sprays, etc.) 

may cause damage if they 

come into contact with the 

surfaces of the appliance. 

Therefore please note:

Do not allow these agents to 

come into contact with the 

surfaces of the appliance.

Clean the appliance with 

nothing but water and a soft, 

damp cloth.

Remove any detergent, 

spray or other residues 

immediately.

Summary of Contents for WN44A1E0DN

























































Reviews: