en
Appliance settings
40
Q
Appliance settings
Appliance settings
You can change the following settings:
■
The volume of the end signal.
■
The volume of the button signal.
You will need to activate the setting
mode in order to change these settings.
Activate setting mode:
1.
Set the programme selector to
position 1. The appliance is switched
on.
2.
Touch and hold the
I
Start/Reload
button and, at the same time, turn
the programme selector clockwise to
position 2. Release the
I
Start/
Reload
button.
The setting mode is activated and the
preset setting appears in the display
panel.
Changing the volume
Use the
Ready In
button to change the
following settings at the corresponding
programme selector positions:
■
2: The volume of the end signal.
■
3: The volume of the button signals.
Exiting setting mode
You can now end the process and set
the programme selector to the
Û
(Off)
position. The settings are saved.
H
Sensors
Sensors
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.
If the laundry is extremely unevenly
distributed, the spin speed is reduced
or the spin cycle is not performed for
safety reasons.
Note:
Place large and small items of
laundry evenly in the drum.
1/2/3/...
positions on the
programme selector
0 = off, 1 = quiet,
2 = medium, 3 = loud,
4 = very loud
