Malfunctions and how to fix them
NL
Malfunctions
Cause/Solution
Detergent/fabric softener
drips from the seal
and collects on the
door or in the fold of
the seal.
There is too much detergent/fabric softener in the dispensers. Do not fill the
dispensers above the
max.
marking.
The spin result is not
satisfactory.
■
Not a malfunction: the imbalance detection system has interrupted the
spin cycle because the laundry was unevenly distributed. Distribute
small and large items of laundry evenly in the drum. Is additional
program settingæ
Less Ironing (Anti-crease)
chosen (depending on
the model)?
Is additional program setting
Night program
or program
Night
program
chosen (depending on the model)? Is the selected speed
too low?
Laundry wet/too damp.
■
■
■
The spin cycle becomes No fault: the imbalance detection system corrects an imbalance.
several times
fed.
The program takes a long
■
Not a malfunction: the imbalance detection system corrects an
imbalance by dividing the laundry several times.
Not a fault: the foam detection system has been activated – a rinse cycle has
been activated.
ger than usual.
■
The length of the program
changes over time
during the wash cycle.
Not a malfunction – the program sequence is optimized for the
specific washing process. This may affect the duration of the
program displayed on the display panel.
Odors, staining in
the device.
Enter it
Cotton 90°C
program without laundry. Add
washing powder or detergent with bleach.
Note:
To avoid foaming, use only half the amount of detergent
recommended by the detergent manufacturer. Do not use
detergents intended for woollens or delicates.
Loud noises, vibration
■
and "movement" of the
device during the centri-
Is the appliance leveled?~ "
Are the legs of the appliance secured? Secure the legs of the
device.
Have the transport locks been removed?~ "
■
fugue cycle.
The indicator lights of
■
■
Has there been a power outage?
Have the fuses blown? Reset/replace the fuses.
If the fault occurs repeatedly, please contact customer service.
the display panel work
■
not while the device is
running.
■
There is detergent
residue on the laundry.
■
Some phosphate-free detergents contain residues that are not
water-soluble.
Choose
To rinse
or brush the laundry after washing.
■
Spin noise during the
drying phase.
This is an innovative process called 'thermal centrifugation' and is
intended to reduce energy consumption during drying. The process is
designed like this, wait for the program to finish.
53
