Siemens WMH4Y8S9DN Instruction Manual And Installation Instructions Download

Page: 44 / 76

Operating the appliance

Start the programme

Make sure that no items of laundry are

trapped between the door and the

rubber seal, and close the door.

The main menu for the selected

programme is indicated again on the

display panel.
Press the

button to start the

programme.
During washing, the progress of the

programme is displayed in a bar on the

display panel. The bar fills in during the

washing cycle and provides information

about the current progress of the

programme.
The arrows fade in and out according to

the progress of the programme. They

indicate the programme settings/

options which can be changed/added

as the programme progresses.

Some programme sequence steps

explained:

■

Load adjust active

Page 61

■

Pre-washing, Washing, Rinsing,

Spin, Drain

... are displayed during

the wash cycle.

■

Extra rinse: foam

Note:

Foam detection

Foam has been detected

also

appears on the display panel, the

washing machine has detected too

much foam during the wash

programme and has automatically

switched on one or more rinse

cycles in order to remove the foam.

Add less detergent to the next

washing cycle with the same load.

■

Other displays

Page 67

If you want to lock the programme to

prevent it from being inadvertently

adjusted, you can select the childproof

lock as follows.

Child lock

(

3 sec.)

You can lock the washing machine to

prevent the functions you have set from

being changed inadvertently.
To

activate

/deactivate, press and hold

both buttons

Child lock

(

3 sec.) for

approx. three seconds.

Page 25

Childproof lock activated

appears

in the display panel.
After approx. three seconds, the display

reverts back to the main menu.
If you adjust the programme selector or

select a button when the childproof lock

is activated,

Childproof lock

activated

appears in the display panel.

Notes

■

The childproof lock can be activated

regardless of the appliance's status.

■

The childproof lock remains active,

even once the washing machine has

been switched off. Before selecting

the next programme, deactivate the

childproof lock.

■

If the appliance is switched off while

the programme is running and

childproof lock is activated, the

programme continues when the

appliance is switched back on.

/RDGDGMXVWDFWLYH

Summary of Contents for WMH4Y8S9DN













































































Search results

Summary of Contents for WMH4Y8S9DN

Reviews:

Related manuals for WMH4Y8S9DN

Brands by name

Popular brands

Siemens WMH4Y8S9DN, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WMH4Y8S9DN

Reviews:

Related manuals for WMH4Y8S9DN

Brands by name

Popular brands