Siemens WMH4W640IL Instruction Manual And Installation Instruction Download

Page: 47 / 68

Home Connect

Caution!

Damage to the appliance

Cleaning agents and agents for

pretreating laundry (e.g. stain removers,

prewash sprays, etc.) may cause

damage if they come into contact with

the surfaces of the washing machine.

Do not allow these agents to come into

contact with the surfaces of the washing

machine. If necessary, immediately wipe

away spray residue and other residues/

droplets with a damp cloth.

Notes

■

When dosing all detergents,

cleaning aids and cleaning agents,

always follow the manufacturer's

instructions.

■

If dosing detergent manually, do not

add additional detergent to the

intelligent dosage dispenser (set

intelligent dosage to "off"

). This will

prevent overdosing and foaming.

■

Dilute viscous fabric softener and

fabric conditioner with water to

prevent blockages.

Dosing and adding detergent:

Pull out the detergent drawer.

Add the correct dosage to

compartment

depending on:

– Soiling

– Water hardness (ask your water

supply company)

– The amount of laundry

– The manufacturer's instructions

Close the detergent drawer.

Home Connect

Home Connect

This appliance is Wi-Fi enabled and can

be controlled remotely via a smartphone

or tablet PC.
With the Home Connect app, you can

use your smartphone or tablet PC to do

the following on this appliance:

■

Select and start programmes.

■

Change programme settings.

■

Query the status of programmes.

■

Change appliance settings.

■

Switch off the appliance.

Before you can use the Home Connect

functions, you will need to install the

Home Connect app on your

smartphone or tablet PC, register,

connect your appliance automatically

manually to your home Wi-Fi network

(you only need to do this the first time)

and then connect your mobile device to

your appliance via the

Home Connect app.
You can find information about the app

on our Home Connect website

www.home-connect.com.

Notes

■

Please observe the safety

precautions in this instruction

manual and make sure that these

are complied with even when

operating the appliance via the

Home Connect app while you are

away from home. You must also

follow the instructions in the

Home Connect app.

■

You cannot use the

Home Connect app to make

changes while the appliance is in

operation. You will be able to use the

Home Connect app to see any

adjustments made directly on the

appliance itself, however.

Summary of Contents for WMH4W640IL





































































Search results

Summary of Contents for WMH4W640IL

Reviews:

Related manuals for WMH4W640IL

Brands by name

Popular brands

Siemens WMH4W640IL, Instruction Manual And Installation Instruction

Search results

Summary of Contents for WMH4W640IL

Reviews:

Related manuals for WMH4W640IL

Brands by name

Popular brands