Siemens WM6HXK76NL, User Manual

Page: 48 / 68

NL Troubleshooting
Malfunction
"E:30 / -80"
Cause and Troubleshooting
▶
When dosing manually, reduce the amount of
detergent for the next wash with an equal load.
Unauthorized extension mounted on the water drain
hose.
▶
Remove any unauthorized extensions from the
water drain hose. Connect device
Pump cover is not fully screwed in.
▶
Make sure that the pump cover is screwed into the
device as far as it will go. The pump cover handle
must be vertical.
"E:36 / -25 / -26" Drain pump is clogged.
▶
→
"Cleaning the drain pump", page 43
"E:38 / -25 / -26" Drain pump is clogged.
▶
→ "Cleaning the drum", page 41
if the error is displayed again,
▶
→
"Cleaning the drain pump", page 43
Inlet opening of the rubber sleeve is clogged.
▶
→ "Clean the inlet opening in the rubber sleeve",
Page 46
"E:10 / -00 / -10 /
- 20"
Pump of the intelligent dosing system is blocked.
1.
Switch off the device.
2.
Clean the pump unit.
→ "Cleaning the detergent drawer",
Page 42
3.
If the indication reappears, enable the service.
→
"Customer Service", page 60
Remark: You can start the washing program if you
deactivate the intelligent dosing system and dose
manually.
→ "Buttons", Page 25
Water pressure is low.
No solution possible.
Strainer in the water supply is clogged.
▶ Clean the strainer in the water supply.
Water tap is closed.
▶
Open the water tap.
Water supply hose is kinked or pinched.
48