Siemens WM6HXK0ODN User Manual And Assembly Instructions Download Page 59

Page: 59 / 72

Troubleshooting

Fault

Cause

troubleshooting

The programme does not
start.

The pump for the intelligent
dosing system is blocked.

Switch off the appliance.

Clean the pump unit.

→

"Cleaning the detergent drawer",

Page 49

If this indicator appears again, call
our after-sales service.

→

"Customer Service", Page 67

Note:

You can start the washing pro-

gramme if you deactivate the intelli-
gent dosing system and dose manu-
ally.

→

"Buttons", Page 25

The door cannot be opened.

is activated.

▶

Continue the programme by select-
ing

Spin

Drain

and pressing

→

"Resuming the programme when

the programme status is Rinse
Hold", Page 40

The temperature is too high.

▶

Wait until the temperature has
dropped.

▶

→

"Cancelling the programme",

Page 39

Water level is too high.

▶

Start the

Drain

programme.

Power failure.

▶

Open the door using the emergency
release.

→

"Emergency release", Page 65

The water is not draining.

Drain pipe or water outlet
hose is blocked.

▶

Clean the drain pipe and the water
outlet hose.

Drain pipe or water drain
hose is caught or jammed.

▶

Ensure that the drain pipe and wa-
ter drain hose are not kinked or
trapped.

Drain pump is blocked.

▶

→

"Cleaning the drain pump",

Page 51

is activated.

▶

Continue the programme by select-
ing

Spin

Drain

and pressing

→

"Resuming the programme when

the programme status is Rinse
Hold", Page 40

The water outlet hose is con-
nected too high.

▶

Install the water outlet hose at a
maximum height of 1 metre.

→

"Technical specifications",

Page 70

Summary of Contents for WM6HXK0ODN









































































Search results

Summary of Contents for WM6HXK0ODN

Reviews:

Related manuals for WM6HXK0ODN

Brands by name

Popular brands

Siemens WM6HXK0ODN, User Manual And Assembly Instructions

Search results

Summary of Contents for WM6HXK0ODN

Reviews:

Related manuals for WM6HXK0ODN

Brands by name

Popular brands