Siemens WM6HXK0ODN User Manual And Assembly Instructions Download Page 17

Page: 17 / 72

Installation and connection

Unscrew and remove the screws in
the vertical transport struts using a
T20 screwdriver.

Remove the transport struts.

Undo and remove the screws in
the horizontal transport strut using
a T20 screwdriver.

Remove the transport strut.

Connecting the appliance

Connect your appliance to the power
supply, water inlet and water outlet.

Connecting the water inlet hose
Note:

Please read the information in

the "Safety" →

Page 4

and "Prevent-

ing material damage" →

Page 11

sec-

tions to ensure that you use the appli-
ance safely.

WARNING

Risk of electric shock!

The appliance contains live parts.
Touching live parts is dangerous.

▶

Do not immerse the electrical
AquaStop valve in water.

Connect the water inlet hose to a
tap (26.4 mm = 3/4").

¾˝

min.

10 mm

17 mm

¾˝

min.
10 mm

When connecting to a 21 mm = ½"
tap, first fit the adapter with a seal-
ing washer.

Summary of Contents for WM6HXK0ODN









































































Search results

Summary of Contents for WM6HXK0ODN

Reviews:

Related manuals for WM6HXK0ODN

Brands by name

Popular brands

Siemens WM6HXK0ODN, User Manual And Assembly Instructions

Search results

Summary of Contents for WM6HXK0ODN

Reviews:

Related manuals for WM6HXK0ODN

Brands by name

Popular brands